Motostarters (MS)
Motostarters are suitable for the installation of low voltage equipment for broad purposes. We design, manufacture cabinets, install the equipment and wiring, examine and give certificates.
Motostarters are made of pickled steel sheet thickness of 1.5mm. It can be made of aluminum or sheet prokron. Also, upon request we make holes for the instruments at the door and opening for the cables installation. Surface protection is done by powder coating, usually RAL: 7032 or 7035 or to order. Motostarters can be mounted on a wall or podium.
IP protection: up to 54
 |
 |
Motostarter sizes (MS0-MS8):
| Pos. | Name (shape and sizes) | A | B | C | X | Y |
| 9 | Motostarter 2MS8 | 1500 | 900 | 450 | 1540 | 860 |
| 8 | Motostarter 2MS7 | 1300 | 800 | 320 | 1340 | 760 |
| 7 | Motostarter 2MS6 | 1100 | 700 | 270 | 1140 | 660 |
| 6 | Motostarter 2MS5 | 900 | 600 | 270 | 940 | 560 |
| 5 | Motostarter 2MS4 | 800 | 550 | 270 | 840 | 510 |
| 4 | Motostarter 2MS3 | 650 | 500 | 270 | 690 | 460 |
| 3 | Motostarter 2MS2 | 500 | 400 | 170-220 | 540 | 360 |
| 2 | Motostarter 2MS1 | 400 | 300 | 170-220 | 440 | 260 |
| 1 | Motostarter 2MS0 | 300 | 200 | 170-220 | 340 | 160 |
On customer's request, we are able to make motostarters in other dimensions.
Copyright (c) 2012. KončarEU, Prisoje 29A, Dicmo, HR